Certifications that require only ONE course:

1) >> Infrared Thermography-Level 1 Certification [just 1 course + report]

2) >> Infrared Thermography-Level II Certification [just 1 course + report]

3) >> Medium-Voltage Cable Testing & Diagnostics Technician Certification [just 1 course]

4) >> Basic Protective Relay Maintenance Technician Certification [just 1 course]

5) >> Advance Protective Relay Maintenance Technician Certification [just 1 course]

6) >> Generation Protective Relay Maintenance Technician Certification [just 1 course]

7) >> Solid State Protective Relay Maintenance Technician Certification [just 1 course; presently only ONSITE; call us for details at 214-330-3502]

8) >> Fiber Optic Technician Certification [just 1 course & 70%+ on test score]

Certifications that require only TWO OR THREE course:

9) >> Medium-Voltage Cable Technician Certification [just 2 courses]:

1. Cable Fault Location and Tracing, Medium-Voltage AND
2. Cable Splicing and Terminating, Medium-Voltage

10) >> Substation Technician Certification [just 3 courses]. There are a few options you can take to earn this certification. Click here or the button below to read more.

11) >> Low-Voltage Circuit Breaker Maintenance Certification [just 3 courses]

Low-Voltage Circuit Breaker Maintenance Certification:

Just 3 courses | REQUIREMENTS

The certification will be valid for 3 years from the date of issue.

The following courses may be completed in any order, within an 18-month period, to meet certification requirements:

1) OSHA OR NFPA course — not both: Register for OSHA Electrical Safety-Related Work Practices, 2 days (In-Person), 1.4 CEUs, OR NFPA 70E 2021 Electrical Safety, 2 days, 1.4 CEUs (In-Person or Virtual, Live).

2) Plus, you must take these two courses:

• Circuit Breaker Maintenance, Low-Voltage (In-Person), 4.5 days, 3.2 CEUs.

And, you need
• Circuit Breaker Maintenance, Molded- and Insulated-Case (In-Person), 2 days, 1.4 CEUs.

Click HERE for more information or to register for the course(s) for the Low-Voltage Circuit Breaker Maintenance Technician Certification.

12) >> Industrial Electrical Safety Inspector Certification [just 2 courses]

Industrial Electrical Safety Inspector Certification:

Just 2 courses | REQUIREMENTS

Do you inspect industrial electrical systems? Electrical safety regulations and standards have become increasingly complex as research reveals better hazard elimination strategies. Even experienced inspectors may have difficulty identifying violations of new requirements. This certification provides a means to qualify electrical inspectors to identify electrical safety violations in industrial facilities. What is certification? Certification means you have achieved certain performance criteria - knowledge, skills and abilities through training. Certifications prove your skills, and their value is the recognition of customers, coworkers and employers. This certification also meets the requirements of OSHA 29 CFR 1910.269(a)(2)(vii).

The certification will be valid for 3 years from the date of issue.

This certification requires completion of the following two courses, which may be completed in any order within an 18-month period:

1. National Electrical Code 2020, 4 days, 2.8 CEUs, which you can take In-Person or Virtual, Live.
   AND
2. Electrical Safety for Inspectors, 4 days, 2.8 CEUs.

Click HERE for more information or to register for the course(s).

Any Questions about these 12 certifications?

Please contact:
Gary Osborne
AVO's LMS Administrator/Registrar
AVO Training Institute |4545 W. Davis | Dallas, TX 75211
T: 214-330-3502
E: gary.osborne@AVOtraining.com | www.avotraining.com